Glo-plugs – 3 Volt (1 per package)

Manufactured for Theatre Effects, original part number IG22

These are 3 volt reusable igniters used with the Mini Flash & Fire System. These are what get hot and ignite the flash cotton & flash paper. Eventually these will burn out and this is a replacement plug.

These are reusable igniters and are included in devices that require them, such as our Flash Guns, Flash Wands, and the UFK line of products.  They are made to work dozens of times; however, sometimes they burn out, become broken, or need to be replaced.

Follow the directions that accompany your device for proper replacement.

IMPORTANT:  We do not recommend using Duracell or Energizer Max batteries with Glo-Plug operated devices. These “overcharged” batteries supply too much voltage and will prematurely burn out your plug.  We recommend using regular Energizer or standard alkaline batteries only!

Wizard Tip: These new Glo-Plugs will operate properly between 1-3v DC (aka 1-2 AA, AAA, or “N” size batteries).  However, using a 3 volt power source does not mean a better effect!  While using at lower voltages “may” cause a very slight delay in firing your device (we’re talking about milliseconds), this will greatly extend the life of your plug!  If you have an older Pyrowizard product that specifically requires a “3v” plug, you can still use these new Glo-Plugs but we recommend reducing your power voltage by using a battery spacer (aka “Dummy Battery”) or simply use “slightly used” batteries in your device.

Specifications:

Thread Size: 1/4-28
Voltage Range: 1-3v DC
Optimal Voltage: 1.5v DC
Maximum Voltage: 3v DC
Battery Options: 1 or 2 AA, AAA, or N sizes

1 plug per package